The Technology
Light, by the stitch.
Electroluminescent thread that runs through a standard sewing machine and lights the line it stitches. The illumination is the seam, not a part fixed on top of it.
Most illuminated apparel bonds a rigid panel or a strip onto the cloth. SewGlo removes the part entirely: the light is the thread, so it sews in on the machines a garment factory already runs and follows the pattern you already design.
SewGlo is a flexible electroluminescent thread, not a wire to sew around or a panel to apply. It feeds through a standard machine and stitches as a seam, an embroidered line, or a decorative pattern.
The glow is a cold electroluminescent light source carried along the thread itself. No heat, zero rigid components, and 0g (0oz) of added bulk, so the garment keeps its hand and drape.
SewGlo runs on a compact EL inverter, battery or USB powered, and is compatible with the VynEL inverter system. One driver lights the sewn lines across the piece.
SewGlo loads into a standard sewing machine and stitches directly into any fabric, cotton, synthetic, or blend. There is no channel to rout, no housing to mount, no bonding step after assembly.
Illumination follows the needle. A seam becomes a line of light, embroidery becomes a glowing motif, and the pattern is yours to draw.
The light is electroluminescent and cold to the touch, generating no heat and no interference. Because there are no rigid components and no added weight, the finished garment looks and moves like an unilluminated one, until you power it on.
It is a continuous sewn line, not a grid of points, so there are no pixels to burn out across the run of a seam.
SewGlo is machine sewable and machine washable, specified to be fashion safe. It is built for apparel that is worn, laundered, and worn again, not for a single appearance under the lights.
That durability is what lets a brand put it into a product that sells, warrants, and survives an owner's wardrobe.